Try to set a system restore point before installing a device driver.
FUJIFILM PC AUTOSAVE MAC 10.12 DRIVER
It is highly recommended to always use the most recent driver version available.
If you don't use such a software, select "MTP(PTP)" in the "USB MODE".
FUJIFILM PC AUTOSAVE MAC 10.12 SOFTWARE
"PC SHOOT AUTO" and "PS SHOOT FIXED" in the "USB MODE" are the modes to use PC shooting software like the optional accessory HS-V5. If you press "OK" button, the camera will turn off without recording images. With this upgrade, a message will appear to confirm whether you stop the image transfer to the PC or not in such operations.
In case that "PC SHOOT FIXED" is selected in the "USB MODE" and the camera is not connected to a PC via a USB cable, you cannot turn off the camera when you turn the ON/OFF switch to the OFF position or remove the lens from the camera because the camera stays in the waiting mode for image transfer. When "PC SHOOT FIXED" is selected, the warning of "IMAGES ARE NOT SAVED IN THE CARD" appears Improvement of camera function stability when used with shooting software like the Tethered Shooting Software HS-V5. Improvement of the display for the "USB MODE" in the SET-UP menu The phenomenon is fixed that Wi-Fi communication with "FUJIFILM PC AutoSave" stops at the moment the LCD turns off Improvement of the Wi-Fi function when "FUJIFILM PC AutoSave" is used. If "S (Shutter-Priority)" or "M (Manual Exposure)" mode is selected, set the shutter speed to 1/180 sec. An external non-TTL flash will fire when the "MECHANICAL+ELECTRONIC" is selected in the "SHUTTER TYPE" option of the SHOOTING MENU. Improvement of the flash function when "MECHANICAL+ELECTRONIC" is selected.
0 kommentar(er)
